Hi Do you have the frequency counter probe connected to the BFO test point. If you do, does the frequency counter work when you connect it to the 4.000Mhz oscillator on the control board. If not then you have a problem with the frequency counter on the control board. Possibly low gain on Q9 and Q10. If you just forgot to plug in the counter probe then that is your problem.
Don Brown KD5NDB ----- Original Message ----- From: "Ron Polityka" <[EMAIL PROTECTED]> To: ".Elecraft" <elecraft@mailman.qth.net> Sent: Wednesday, February 22, 2006 7:12 PM Subject: [Elecraft] CAL FIL > Hello, > > Hope someone can help me with a problem I am having trying to set my CAL > FIL settings. > > I am using the N0SS program and I have looked in my K2 manual and the one > on > line. I have Processor 2.01H version and I/O Controller 1.02 version. > > I basic K2 for QRP operation without 60 meters. > > I can't seem to enter the new value of the CAL FIL that I want to keep. I > get a INFO 230 which is BFO is not connected to freq. counter. > > I know I am missing something but I just can't place my finger on it. > > When I go and set my FL1 and hit the XFIL button all 000000 come up and > then > InFO 230 shows up. > > Any help would be grateful, thanks in advance. > > 72 and Thanks, > Ron Polityka > WB3AAL > www.wb3aal.com > www.n3epa.org/ > > K1 - SN 01011 > K2 - SN 01392 > > > _______________________________________________ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com