Thanks Jim: I'll add that detail to the manual. Feedback like yours is how we constantly improve the instructions.
73, Ron AC7AC -----Original Message----- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim Spears Sent: Sunday, April 3, 2016 7:26 AM To: elecraft@mailman.qth.net Subject: [Elecraft] K3: issue with K3EXREF installation, part 2 Thanks for the comments folks. I now know exactly what I did wrong. There were two details I messed up. The first detail was threading the coax before tightening the outside nut. This caused the coax itself to be torqued and rotate when I tightened the outside nut without securing the body of the connector which is detail two. The second detail was not securing the body of the connector when I tightened the outside nut which allowed the coax to be torqued and rotate which is detail one. The result was that the coax torqued since it was not free to rotate and put force on the ferrule which caused it to break apart. Lessons learned. When I get the replacement coax, I will make sure I do not thread the coax before tightening the outside nut AND will secure the body of the connector. It appears that the K3 is happy with the signal coming in from the GPSDO but this is not a desirable long term situation. Jim/N1NK ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to r...@cobi.biz ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com