Agreed re: Mic button setting, that happens to me all the time. Would it be possible to have it turn it off when switching to DATA A? Also, widening the filter BW out to the full 4kHz at the same time? Perhaps there's other uses of DATA A I don't know that might make these requests invalid, so forgive me if so. :)
Thanks! David / K5DJO On Sun, May 8, 2016 at 3:32 PM, Erlend Grimseid <egrims...@gmail.com> wrote: > When i tested, mic bias remained on when switching to data mode. And it > is annoying because when using the radio with an smart phone the plug is > not recognised as an 4pole plug for some reason. > > Also mic button settings can't be changed. So every time i go from hand > mic to phone I forget, the stereo plug triggers the ptt, and I have to > switch back to ssb to make changes. > > I wold love to be able to change mic settings in data mode. And that mic > level, button and bias settings to be stored pr mode. > > Something for the next firmware maybe? > > 73 > La4tta > Erlend. > 8. mai 2016 4:47 p.m. skrev "Bill Frantz" <fra...@pwpconsult.com>: > > > I had to set up my KX3 for digital operation with a SignaLink USB from > > scratch again, and I had to learn the same "features" which tripped me up > > the last time over again the hard way. I'm documenting them here in > hopes I > > won't forget them the next time. (I'm also writing them on a file card to > > keep with the radio.) > > > > (1) High levels of Mic input show up as zero signal. The fix is to always > > start from 0 and move slowly up in levels. Mic level 5 seems to be about > > right for my setup. > > > > (2) You can't be in a digital mode (DATA A etc.) and turn off mic bias. > > All you get is N/A. It seems to be a poor idea to DC bias the isolation > > transformers in the SignaLink, so you really need it off. And of course, > > voice modes won't work until you turn mic bias back on again. > > > > In an ideal world, the level, bias, and VOX settings would be saved > > separately for Data and Voice modes. (And the radio would recognize that > > mic input settings need to be made in data modes.) > > > > But the results are worth it. From New Hampshire, I've been able to work > > 14 DXCCs including an ATNO. I also had a long rag chew with AE5ZA in > Texas, > > all on 20M PSK31/63 with only a few hours of operating. > > > > 73 Bill AE6JV > > > > > --------------------------------------------------------------------------- > > Bill Frantz |"We used to quip that "password" is the most common > > 408-356-8506 | password. Now it's 'password1.' Who said users > > haven't > > www.pwpconsult.com | learned anything about security?" -- Bruce Schneier > > > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to egrims...@gmail.com > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to orma...@corenode.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
