I run on a raspberry pi under linux. Hardware Comm
On May 23, 2016 5:17:53 PM EDT, Bob Darlington <rdarling...@gmail.com> wrote: >Are you using virtual com port software that's not up and running >before >you start fldigi? Are you saying "yes" to the save settings popup when >closing after you fix the problem? > >-Bob > >On Mon, May 23, 2016 at 3:13 PM, Paul Christensen <w...@arrl.net> >wrote: > >> Dave, >> >> Correct. I must always initialize Fldigi with my K3. Once >initialized, >> it's works fine. If I close it and re-open, initializing is needed >again. >> >> Paul, W9AC >> >> On Mon, 2016-05-23 at 13:19 -0400, Paul Christensen wrote: >> > Jerry, >> > >> > Thanks for the tip. I'll use a macro in Fldigi if there's no >simple >> > solution available. >> > >> > Paul, W9AC >> >> Paul, >> >> If I understand you correctly, you set things up in FLDigi, get them >> working, and then if you close the program, and restart it, the rig >is >> no longer controlled. Is that correct? >> >> >> >> -- >> 73's, and thanks, >> Dave (NK7Z) >> For software/hardware reviews see: >> http://www.nk7z.net >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to rdarling...@gmail.com >> -- Sent from my Android device with K-9 Mail. Please excuse my brevity. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com