Hey, a little OT, but I discovered today that my raspberry pi took my noise floor from S9 constant (with some peaks higher) down to an S4 with peaks around S5 once I unplugged it. These things are BAD. I can't vouch for the r-pi 2 or 3 but I can say that my APRS digipeater is now off the air because of it till I get everything into a shielded metal enclosure.
-Bob On Mon, May 23, 2016 at 3:45 PM, Jerry Moore <je...@carolinaheli.com> wrote: > I run on a raspberry pi under linux. Hardware Comm > > > > On May 23, 2016 5:17:53 PM EDT, Bob Darlington <rdarling...@gmail.com> > wrote: >> >> Are you using virtual com port software that's not up and running before >> you start fldigi? Are you saying "yes" to the save settings popup when >> closing after you fix the problem? >> >> -Bob >> >> On Mon, May 23, 2016 at 3:13 PM, Paul Christensen <w...@arrl.net> wrote: >> >>> Dave, >>> >>> Correct. I must always initialize Fldigi with my K3. Once initialized, >>> it's works fine. If I close it and re-open, initializing is needed >>> again. >>> >>> Paul, W9AC >>> >>> On Mon, 2016-05-23 at 13:19 -0400, Paul Christensen wrote: >>> > Jerry, >>> > >>> > Thanks for the tip. I'll use a macro in Fldigi if there's no simple >>> > solution available. >>> > >>> > Paul, W9AC >>> >>> Paul, >>> >>> If I understand you correctly, you set things up in FLDigi, get them >>> working, and then if you close the program, and restart it, the rig is >>> no longer controlled. Is that correct? >>> >>> >>> >>> -- >>> 73's, and thanks, >>> Dave (NK7Z) >>> For software/hardware reviews see: >>> http://www.nk7z.net >>> >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to rdarling...@gmail.com >>> >> >> > -- > Sent from my Android device with K-9 Mail. Please excuse my brevity. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com