The error was FP3, no FPF.......Mike AD5A ----- Original Message ----- From: "Mike Crownover" <a...@gvtc.com> To: elecraft@mailman.qth.net Sent: Friday, May 27, 2016 9:01:09 PM Subject: [Elecraft] FPF problem
I have a K3 that has been sitting on shelf for a while. I powered it up today, after it was on for ~5 minuted, I get a ERR FPF. After a little research I learn I need to reload the flash file. I used the utility to update the MCU and then when the FPF tried to load I got this message. Elecraft K3 Utility Revision 1.15.12.7 OS Version 10.0 Build 10586 K3 MCU revision 05.38. RS-232 speed 38400 bit/s. Waiting 4 seconds for flash memory erase Sending firmware file C:\Users\ad5a_000\AppData\Roaming\Elecraft\K3 Firmware\hfpf0125.hex to FPF Error code 0xE2000048: No response to poll while synchronizing to buffer boundary FPF verification failed. Reload FPF. Click "Close" to close this window I have retried numerous times and get the same message. Any ideas. Mike AD5A ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to a...@gvtc.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com