Phil, Is this something new with El Capitan? I’ve always been making settings changes in the MIDI application. Anyway, I gave it a try and set USB Audio CODEC as the output device. Fired up WSJT-X and answered a CQ. It keyed the K3 for about five seconds and then the audio started coming out the iMac internal speakers. Wonderful. This is the same crud as what was happening before. Not everyone on 10.11.5 is as lucky as I am, but there are a bunch of folks who’ve been hosed by this release. Not sure if you subscribe to the WSJT-X development reflector, but the airwaves were burning on this subject over the past several weeks. Someone at Apple needs a swift kick in the pants….
Jim, W6JHB > On Saturday, May 28, 2016, at Saturday, 8:31 PM, Phil Wheeler > <w...@socal.rr.com> wrote: > > Adding to what I said below: You do System Preferences > Sound > Input if you > want your audio input to come from an external USB device (Griffin iMic, > SignalinkUSB, K3s, etc.). > > I am running OS X 10.11.5 and just tested this with an iMic I happened to > have with me. > > 73, Phil W7OX > > On 5/28/16 8:18 PM, Phil Wheeler wrote: >> Jim (and perhaps Dick), >> >> Then go to System Preferences > Sound > Output and select the external USB >> device you want the as the destination for your audio output. You have to do >> this in OS X, not in the application software. >> >> 73, Phil W7OX >> >> >> >> On 5/28/16 7:49 PM, James Bennett wrote: >>> Dick, >>> >>> By any chance have you in the past few weeks upgraded your mac to El >>> Capitan? I had a working system (K3, FLDIGI, WSJT-X) and silly me, upgraded >>> to El Capitan and a subsequent follow-on update. It has completely broken >>> my digital mode operating. The audio is now routed to the internal iMac >>> speakers - no matter what I’ve put in the settings of either piece of >>> software. Needless to say, with the audio going to the speakers instead of >>> to the K3, it never goes into transmit. Apple has really screwed up things >>> this time. I’ve since moved my digital operation off of the iMac and over >>> to a Raspberry Pi 3 where WSJT-X is working just fine. Havent’ had time to >>> mess with FLDIGI over there yet, but maybe next week. >>> >>> Just a thought……. >>> >>> Jim, W6JHB >>> >>> >>>> On Saturday, May 28, 2016, at Saturday, 12:22 PM, Richard W Hemingway >>>> <rhemi...@sbcglobal.net> <mailto:rhemi...@sbcglobal.net> wrote: >>>> >>>> Hi, >>>> I am about to give up on my K3S and PSK with my Fldigi on my Mac computer. >>>> I am unable to connect either with the SignaLink or with a straight USK >>>> connection. Neither will cause the TX light to come on or TX! I have >>>> never had t his problem before on any of my Rigs, or before when I owned >>>> a K3. Joe tried your hamlib as well as the Rig Cat settings sent to me >>>> from Elecraft. No go.??? >>>> If anyone has any bright ideas please let me know. This should be keying >>>> the K3S but it is not. Have I sset something that would block t his? >>>> All have a great Memorial weekend, remembering our fallen.. >>>> Take care, >>>> Dick. N5XRD > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
