Using Airlink Express (or any other digital program) I can get the PTT LED on the Microham to come on but it doesnt bring the k3 into tx.
*Which PTT LED?* There are two PTT LEDs on microKEYER II (PTT1 which is the mic PTT and PTT2 which is the ACC jack PTT) and one on the K3. As documented in the microKEYER II Users Manual and the configuration examples for several popular software packages, you should configure your digital software to generate PTT by raising the RTS line on a virtual serial port. In addition, Router/MK II should generally be configured to assert PTT2 when transmitting digital modes. 73, ... Joe, W4TV On 5/30/2016 3:25 AM, Ross wrote:
Advice please, I have the Microham working on receive, but I cannot get the transmission side going for digital modes. Using Airlink Express (or any other digital program) I can get the PTT LED on the Microham to come on but it doesnt bring the k3 into tx. I have plugged the microham into the ACC socket, to try to get the K3 to transmit, but that doesn’t work. I have used the setup given in the Microham manual, so far no luck. Ideas please as to what I am missing. Thanks Roass ZL1WN ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to li...@subich.com
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
