Are these 16 macros in addition to above those previously available in
firmware to be assigned to various K3 buttons?
73 de Brian/K3KO
On 7/8/2016 16:07 PM, Dick Dievendorff wrote:
The most recent K3 Utility (1.16.26.5) stores 16 command macros in the K3.
You can install it now from a link at the bottom of:
http://www.elecraft.com/K3/k3_software.htm
Command macros 1-8 correspond to K-Pod buttons F1-F8 Hold, Command macros
9-16 correspond to K-Pod buttons F1-F8 tap.
73 de Dick, K6KR
-----Original Message-----
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Matt
Murphy
Sent: Friday, July 8, 2016 08:50
To: Roger Marrotte <marro...@verizon.net>
Cc: Elecraft Reflector <Elecraft@mailman.qth.net>
Subject: Re: [Elecraft] Now that the K-Pod is shipping, we could use your
help with useful macros
Is there a specification of how the macros work with the knobs? I have not
yet ordered a K-Pod, but would love to write some useful macros (especially
for the knobs). Perhaps I could test the macros using the K3 terminal in the
meantime but it would be great to know how the knobs are configured to
trigger macros first.
Advice appreciated.
73,
Matt NQ6N
On Fri, Jul 8, 2016 at 10:42 AM, Roger Marrotte <marro...@verizon.net>
wrote:
Yes it does. It comes with two 6.8 ohm resistors. One 1/8 watt leaded
resistor and one 1/10 watt smd resistor. I did the mod with the smd
resistor. It's a small resistor about the size of a large fruit fly
and it goes kind of in a tight place, especially for a left hander. I
got it in and it works so I'm happy but if I had to do it again I'd
probably used the leaded resistor. I've done some smd work before.
Roger, W1EM
-----Original Message-----
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Terry Schieler
Sent: Friday, July 08, 2016 10:56 AM
To: 'Wayne Burdick' <n...@elecraft.com>; 'Elecraft Reflector'
<elecraft@mailman.qth.net>
Subject: Re: [Elecraft] Now that the K-Pod is shipping, we could use
your help with useful macros
Looks like my K-Pod should arrive tomorrow. Does it come with the DC
power modification resistors and mod instructions or do I need to order
those?
73,
Terry, W0FM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net Please help support this email
list: http://www.qsl.net/donate.html Message delivered to
m...@nq6n.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to d...@elecraft.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to als...@comcast.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com