I have a couple I have just written:
PSK: MD6;DT0;PC035;AG000;IS 1450;BW0230
Go to Data mode and then Data A. Set output to 35 watts. Turn
audio gain to zero. Set filter center to 1.450 KHz and bandwidth
to 2.300 KHz
This macro sets up for computer PSK, MFSK etc. modes and opens
up the filter so the whole waterfall on my digital program can
show signal.
RTTY: MD6;DT1;IS 9000;BW0040
Goes to Data mode and then AFSKA A. Sets the filter center to
normal and the bandwidth to 400 HZ.
I really need to be able to sense settings and then make choices
based on the setting. The PSK macro would be better if it didn't
raise the power output, so if is used while QRP contesting, it
doesn't accidentally power you out of your entry category. But I
don't want to come on PSK at 100 watts, so I would like to set
35 watts only if the current power is higher. I would also like
to make the power setting safe with milliwatt transverters.
A SSB macro would need to know the band to determine whether USB
or LSB is the right setting.
73 Bill AE6JV
On 7/7/16 at 7:36 PM, n...@elecraft.com (Wayne Burdick) wrote:
Those of you who are not timid with macros: Please send us your
favorites for possible inclusion in the next release of the
K-Pod owner's manual. We've already included a bunch, but I
just know there are some great examples out there we haven't
thought of.
---------------------------------------------------------------------------
Bill Frantz | Re: Computer reliability, performance, and security:
408-356-8506 | The guy who *is* wearing a parachute is
*not* the
www.pwpconsult.com | first to reach the ground. - Terence Kelly
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
