Well, Howard was able to send me FW 2.19 and I had a successful flash to the K3.
Now I tried to jumped from version 2.19 to 5.38, is there a bug in jumping this far? Is there a DSP hardware revision that may have an issue with current version of firmware (older radio, 1st gen, etc...?)??? Anyways my rig is back from being a brick, and is working again. YEAH!!! An observation on this, I accidentally tried to push just the DSP1 Firmware from 2.19 with 5.38 MCU still installed but it would fail, saw my error and corrected it and had a successfully flash when the 2.19 MCU was installed first. This made me wonder if this was part of the problem with the update. Is there some sort of version check with the DSP1 to MCU? I am wanting to try an incremental update from 2.19, but older firmware is not published. Wanted to keep the list updated on whats been happening and thank you for all your support in this. 73 *Matthew Lawson* *KC7EQO* *442.100 + 100 Hz PL Blyn Mt Repeater* *http://www.qrz.com/db/KC7EQO/R <http://www.qrz.com/db/KC7EQO/R>* <http:///www.linkedin.com/in/mlawsonkc7eqo> On Tue, Jul 19, 2016 at 2:02 PM, Matthew Lawson <kc7...@gmail.com> wrote: > I did save the configuration. I thought this was separate from the > firmware. I don't see where to back up just the firmware. It's ju a thought > the dsp1 that fails. > > On Jul 19, 2016 1:43 PM, "Ken G Kopp" <kengk...@gmail.com> wrote: > > Saving the radio's configuration is always a good idea, even if no "event" > is expected. No telling when "something" may happen. (;-) > > 73! > > K0PP > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com