Where is the TX sensor located? It should be between the KPA500 and the KAT500. It sounds like you have it in-line after the KAT500.
Mark, WB9CIF -----Original Message----- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joe K2UF Sent: Wednesday, September 14, 2016 6:49 PM To: elecraft@mailman.qth.net Subject: [Elecraft] SWR question Using my K3/KPA500/KAT500/P3+SVGA with the TX sensor in line. On the KPA500 the SWR reads 1.3 with one or two SWR led's lit also one or two led's lit on the KAT500 but the SWR display on the P3 shows about 6. Any ideas why this is happening? Joe K2UF ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to markmus...@sbcglobal.net ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
