Joel,
thanks for the help; typically I am not in the shack when this happens.
Software sometimes running WSJT-X, sometimes DXLab suite.
Firmware revisions: KX3 - MCU: 02.38, DSP 01.37 ... KXPA100 - 01.35
thanks & 73 de W5SV, Dave
On 9/30/16 06:55, Joel Black wrote:
Dave,
I run the same setup adding the PX3. First, I am *not* experiencing this with
my setup. Second, what are you doing (i.e. software controls, macros, etc.)
right *before* this happens? What version of F/W are you running on each?
73,
Joel - W4JBB
On Sep 30, 2016, at 06:42, David F. Reed <w5sv.d...@gmail.com> wrote:
I am running a KX3 into a KXPA100.
It all plays very nicely except for one issue; on a seemingly random basis, it
seems to lose communications between them in a big way. The KX3 has (without my
doing anything) reset the PA Mode to Off, and the PWR to 5.0. When this
happens, let's say I have power set to 30 watts; the KXPA100 shuts down and to
get it back up, I have to go to the KX3, re-enable PA MODE from Off to On, and
and reset the PWR level from 5.0 watts to 30 watts.
My questions are:
1. Is anyone else experiencing this?
2. What is going on?
3. How do I fix it
Any help appreciated.
Thanks & 73 de W5SV, Dave
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com