I believe MCLR is used to put the PIC (microcontroller) into programming mode
I'm an Atmel guy so I'm not much up on PICs
From: Clay Autery <caut...@montac.com>
To: elecraft@mailman.qth.net
Sent: Monday, January 16, 2017 7:10 PM
Subject: Re: [Elecraft] k-pod data cable
That's the way to do it, Jim....
I spent some hours pouring over the docs and MCLR is NOT used in this
implementation.
73,
______________________
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389
On 1/16/2017 5:01 PM, Jim Brown wrote:
> If I were to make up an extension using CAT5/6, I would use one pair
> for PGD, another for PGC, and the other two for VCC5, tying the four
> returns of each pair together and wiring it to Ground. I'm taking it
> for granted that MCLR is really unused.
>
> 73, Jim K9YC
>
> On Mon,1/16/2017 10:10 AM, Harry Yingst via Elecraft wrote:
>> A little info for those wanting to make longer cables
>>
>> As I understand it the Elecraft connector is a Modified MPLAB IDC 2
>> In-Circut Programming connector
>>
>> Here are the pin outs as I read them
>> 1 Unused - MCLR, Low to reset CPU
>> 2 +5 vDC - VCC5
>> 3 Ground - VSS
>> 4 Data - PGD
>> 5 Clock - PGC
>> 6 +5 vDC - VCC5
>>
>> ______________________________________________________________
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to hlyin...@yahoo.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
