A crystal oscillator might "drift" a few tens of Hz at H.F. on its fundamental frequency but in all the dozens of xtal controlled transmitters I've built and used over the years, nothing greater than that.
There were some circuits designed to "pull" the frequency of a crystal slightly - maybe a few kHz - but they did tend to be unstable. Pulled too far, the crystal oscillator would stop being controlled by the crystal at all and simply become a free-running oscillator. Many novices used "surplus" crystals from military gear and it was common to find several stations on the same frequency when the band was open. So we tinkered with ways to move the crystal frequency slightly by rubbing solder or pencil 'lead' (graphite) on it but one could only go so far or the crystal would stop oscillating. 73, Ron AC7AC -----Original Message----- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of w...@zoominternet.net Sent: Saturday, January 21, 2017 3:13 AM To: Ron D'Eau Claire; 'Richard Fjeld'; elecraft@mailman.qth.net Subject: Re: [Elecraft] K3: past chirp report Xtal controlled could still drift, especially if the rig wasn't warmed up yet….. I got my novice in 1972 and I think that was the first year we could use vfos….. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
