Knut,
The functions of the K3 and K3S are the same, and will likely remain the
same. The differences are in the hardware, so a 2nd MCU file has been
in place for some time to allow for a change in the microcontroller used
in later K3s and the K3S.
I can envision this being expanded, not to change the functions, but to
support minor differences in the hardware. Part of the Elecraft
"magic", such things are transparent to the user.
My point is that K3Utility sorts it all out, and does not have to be
visible to the user, because the same steps to update firmware are used.
73,
Don W3FPR
On 2/24/2017 7:24 AM, ab2tc wrote:
Hi Don,
Hold on a second. Up to this point the firmware for the K3 and the K3S has
been exactly the same. The firmware figures out at run time which features
are available whether it being in the K3 or the K3S and behaves
accordingly. Is there something changed here? That would really complicate
things.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
