Cameron,
There is nothing in that circuit that would have zapped L34. I would
just replace the inductor.
If you do not have good de-soldering equipment, L34 may be difficult to
remove. I suggest destroying the present inductor if you have to, and
take it out one pin at a time (get the shield off first, then work on
the inductor).
Be careful not to damage the thru-plated holes in the RF Board, or you
will be in for a circuit re-wiring task.
73,
Don W3FPR
On 4/4/2017 4:49 PM, Cameron Francey wrote:
Should I just request L34, or is there something else I may need from others
past experiences?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
