Thanks, Jim. The gain setting just has to be set to HIGH. Bias off. I
checked my settings here for the first time in almost seven years.
You got me on that. I was thinking of the CM500 headset. Bah.
73,
matt W6NIA
On 4/17/2017 9:13 PM, Jim McDonald wrote:
I have the HM10 Dual and HC4 headsets. They do NOT need the bias. I've used
the HC4 with and without TXEQ; both are fine.
Jim N7US
Sent from my iPad
On Apr 17, 2017, at 11:00 PM, Matt Zilmer <mzil...@roadrunner.com> wrote:
That depends on the mic itself. The HC4- and HC5-based mics need bias ON, but
don't know about the others (HC6?). Donis correct about the gain range setting.
Both elements are low output, so use HIGH.
z
On 4/17/2017 8:44 PM, Steve Wilson via Elecraft wrote:
OK. And the bias setting?
Thanks, Steve
From: Don Wilhelm <donw...@embarqmail.com>
To: Steve Wilson <steve_wil...@yahoo.com>; "Elecraft@mailman.qth.net"
<Elecraft@mailman.qth.net>
Sent: Monday, April 17, 2017 8:35 PM
Subject: Re: [Elecraft] K3 & Heil HM-10 Dual
Steve,
Heil is giving out erroneous information. The low output Heil
microphones require setting the K3 mic gain range to HIGH.
73,
Don W3FPR
On 4/17/2017 11:14 PM, Steve Wilson via Elecraft wrote:
Hi all,
I setup a K3, that my godfather is borrowing, while his Kenwood is off the air.
I reviewed the webpage on the Heil Sound website here:
https://heilsound.com/heil-amateur-radio/support/dsp-settings/all-things-elecraft/
Unfortunately, the page refers to the mic with regard to the front panel
setting, but does not specifically refer to the mic model with respect to the
mic gain and mic bias settings. I sent an email to Heil Sound suggesting that
the missing detail be added for this particular mic. But thought I'd ask here,
in case anyone knew the answer. I deduced that the setting should be Front
Panel, Low, No Bias, but am not 100% sure about that!
______________________________________________________________
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to mzil...@roadrunner.com
--
"A delay is better than a disaster."
-- unknonwn
Matt Zilmer, W6NIA
[Shiraz]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
