There is a Lin Out setting in menu. Sent from my iPhone ...nr4c. bill
> On Jun 22, 2017, at 1:31 PM, Dick via Elecraft <elecraft@mailman.qth.net> > wrote: > > Hello Elecraft, > > When feeding the audio from the K3S USB port to the CPU, the K3S audio > level is extremely high and way too hot for good performance on many digital > modes. > > Example, even with my CPU's sound card set at the lowest possible level of > "01" my K3S is hitting the JT-65 software with a super strong signal that > is much higher than the software wants to see and performance is degraded. > The same is true when operating RTTY using MMTTY or 2Tone software. > > The USB audio output on the K3S needs to be adjustable in the K3S Menu as > it was on the K3 Serial port. > > I wrote to you a few months ago about this without a positive reply. > Please address this serious issue. > > Thank you- > > Richard Van Zandt- K9OM > > > > In a message dated 6/2/2017 7:28:48 P.M. Central Daylight Time, > elecraft-requ...@mailman.qth.net writes: > > If you are using Line Out with a fixed gain setting to feed audio to > WSJT-X, adjusting the AF control will not do anything. What I do is leave > my RF gain control at its normal position (around 3 o'clock) and use the > slider at the lower left in the WSJT-X window to compensate for gain > variations. > > 73, > Rich VE3KI > > W3FPR wrote: > >> Bret, >> >> You may have better luck with running the RF Gain full and adjusting >> with the AF gain. That way the RX AGC will smooth out variations in the >> signal level. >> >> 73, >> Don W3FPR > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
