Don thanks for this, indeed this is the current solution. Although it is rather obscure as far as indicators on the front panel.
I would like to convert this to a feature request, as It would be nice if the firmware supported, and there was another matrix in the KAT500 Utility that would permit a hard bypass with indicator on a per band basis. Gives that warm fuzzy its doing exactly what you want.. E.g. qsy to 20m.. bypass light comes on.. Chris N6WM -----Original Message----- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Chris Tate - N6WM Sent: Sunday, July 30, 2017 1:31 PM To: donw...@embarqmail.com Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] KAT-500 brain trust question Thanks Don I will take a look Thanks ~C. > On Jul 30, 2017, at 1:29 PM, Don Wilhelm <donw...@embarqmail.com> wrote: > > Chris, > > Yes, see page 17 of the KAT500 manual. Easier for you to read it than for me > to try to explain all of it. > > 73, > Don W3FPR > >> On 7/30/2017 4:01 PM, Chris Tate - N6WM wrote: >> Is there a way to put the KAT500 in bypass when on certain bands? Use case >> is SteppIR on AN1 and auto tracking, and HQ antenna on ANT2 that requires >> tune adjustment and memories. KAT500 is getting band/QRG telemetry via cat >> from radio. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to ct...@ewnetinc.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
