Using DATA A will disable many of the audio processing, such as the MIC gain, RX/TX equalization, and audio compression functions. These are needed to help in between-the-ears processing but sometimes are counterproductive in DATA modes.
--- 72, Rich Hurd / WC3T / DMR: 3142737 PA Army MARS, Northampton County RACES, EPA-ARRL Public Information Officer for Scouting Latitude: 40.761621 Longitude: -75.288988 (40°45.68' N 75°17.33' W) Grid: *FN20is* On Tue, Sep 12, 2017 at 8:58 PM, Tommy <tomm...@hvc.rr.com> wrote: > Don, > > Why DATA A mode and not USB? I've been doing FT8 using USB and it > works fine. It seems. > > Tom - KB2SMS > > KX2 #01927 > > > On 09/12/2017 01:47 PM, Don Wilhelm wrote: > >> I have updated my website www.w3fpr.com with a document dealing with >> using Elecraft transceivers for soundcard data modes. >> Scroll down to the bottom of the left column and click on the link to the >> page. >> >> This document has been reviewed by Wayne and Lyle (perhaps others) at >> Elecraft and approved. >> >> As pointed out, Elecraft transceivers behave differently than other >> amateur transceivers, so the setup procedure is different than the common >> internet advice. >> >> 73, >> Don W3FPR >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to r...@wc3t.us > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
