DATA A also avoids something I hear too often which is an open Mic while doing data modes.
jim ab3cv On Tue, Sep 12, 2017 at 9:15 PM, Don Wilhelm <donw...@embarqmail.com> wrote: > Tom, > > Using DATA A is the same as using USB *except* compression is set to zero > and TX EQ is set to flat automatically. > > So yes, USB may work OK, but you have a lot more flexibility with other > modes when using DATA A. > > That allows you to set whatever you want for SSB and not have to change it > when you want to operate digital - which should not use compression nor > equalization to minimize distortion in the transmitted signal. > > 73, > Don W3FPR > > On 9/12/2017 8:58 PM, Tommy wrote: > >> Don, >> >> Why DATA A mode and not USB? I've been doing FT8 using USB and it >> works fine. It seems. >> >> ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to j...@jtmiller.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
