Don,
Thanks. No, there is nothing on the ACC connector but I'll check it out;
maybe one of the plug pins I snipped ended up back there and is shorting
the line? Seems unlikely but will check it out.
73,
Drew
AF2Z
On 10/28/17 07:51, Don Wilhelm wrote:
Drew,
Do you have anything plugged into the AUX IO connector? If so, remove
it and try to power it down.
If that works, examine all the cabling to the AUX IO, that behavior is
typical if AUX IO pin 8 is held low.
If you are using a VGA cable in the AUX IO connector, change it to a
cable that has all 15 pins straight through.
73,
Don W3FPR
On 10/28/2017 3:55 AM, Drew AF2Z wrote:
My K3 turns on whenever power is connected, without pushing the power
button. When I push the power button to shut down the display clears
but remains lit-- just a blank amber display. Can only turn on again
by recycling the power supply; the K3 Power button has no effect.
Otherwise the rig seems to operate normally.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
