Read your last paragraph and double check your work. Sent from my iPhone ...nr4c. bill
> On Oct 28, 2017, at 3:55 AM, Drew AF2Z <pu...@af2z.net> wrote: > > My K3 turns on whenever power is connected, without pushing the power button. > When I push the power button to shut down the display clears but remains > lit-- just a blank amber display. Can only turn on again by recycling the > power supply; the K3 Power button has no effect. Otherwise the rig seems to > operate normally. > > I reloaded the firmware and config settings but that didn't help. > > This occurred after I replaced the FP plugs with the gold plated ones. I > replaced the PA plugs about a week ago. All plugs are mated/seated correctly; > good solder job. > > Any ideas? > > 73, > Drew > AF2Z > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com