Yep, 1000ft of RG11 direct burial for $100 on Amazon. Good enough for HF on any day.
Mike va3mw On Mon, Nov 6, 2017 at 8:24 PM, Jim Brown <j...@audiosystemsgroup.com> wrote: > Right. Or 75 ohms for 75 ohm splitters and systems. I always specified > low loss CATV RG6 for wireless mic systems, and most ham RX systems are > designed around 75 ohms. The reason is simple -- we can buy much better 75 > ohm cables at much lower prices than what we would have to pay for 50 ohm > cable. Phat Satellite, for example, sells 1,000 ft spools of flooded > Commscope RG6 for less than $100, including shipping. > > 73, Jim K9YC > > On 11/6/2017 4:41 PM, Alan Bloom wrote: > >> >> And don't forget that the isolation spec assumes a perfectd 50-ohm >> termination on all ports. For example if one of the ports is seeing a load >> with a 10 dB return loss, then the isolation will be no better than 10 dB. >> >> ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to va...@portcredit.net > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
