Is there a way of tuning the any of the Elecraft tuners outside
the legal transmission bands? I can imagine hooking an antenna
analyzer through the tuner and using the analyzer to know which
C, L, and Relay values are the best match. But I don't think any
of the Elecraft turners have a UI to set those values when
running the experiment.
73 Bill AE6JV
On 11/18/17 at 1:17 PM, k6...@foothill.net (Fred Jensen) wrote:
The KAT500 memories cover the range 1500 KHz to 60.0 MHz, no
gaps, in a series of "bins". Each bin holds capacitor and
inductor values, relay settings, antenna connector selection,
and a couple of other values. Each bin covers a bandwidth
that is a function of frequency. The lower bands are narrow
and the BW of a bin increases as you go up in frequency.
For 80 meters, the bins are 20 KHz wide, and there are 90 of
them from 3001 KHz to 4800 KHz. Most of the higher frequency
bands [40 thru 15] have 50 KHz bins. 12 and 10 are 100 KHz, and
I believe 6 is 200 KHz. So, to "train" your KAT500:
------------------------------------------------------------------------
Bill Frantz |"Insofar as the propositions of mathematics
refer to
408-356-8506 | reality, they are not certain; and insofar
they are
www.pwpconsult.com | certain, they do not refer to reality.”
-- Einstein
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com