Hello group, I received a new KX2 from Elecraft a few days ago and I am really enjoying the little GEM!
As many of you already must know, the receiver performs brilliantly. I have been comparing with a couple of SDR receivers in the shack and the KX2 is preferred for weak signal reception in any mode. I plan to use it portable of course, but for now have it set up in the shack with an SDR receiver tracking with it as a panadapter. I have noticed that the KX2 produces about a -74dBm signal into the SDR that is connected in parallel to the same Rx antenna (through a T/R switch). The signal is offset about 8 kHz from the VFO , so the KX2 must use the offset full time where it was a menu option on the KX3 I had? For anyone using a similar setup I wonder if you see the signal at about the same power level? Am I correct that the nulling or supression is done at the audio stage within the KX2 (because I can't hear it when I tune the 2nd VFO to it in Dual Rx)? Thanks Elecraft for another great transceiver and thank you all on the group for being there as a great resource! KV4TT - Mike KX2 s/n 2300 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com