Hello Bill, It *seems* to me that the following would achieve your goal, but the gazillion cables behind the radios at this wireless station discourages me from attempting to pull the K3 out away from the wall far enough to actually try it.
-- Disconnect your low-noise rx antenna from the K3 'AUX RF' input, and connect it instead to the K3 RX ANT 'IN'. -- Then, engage the "RX ANT" button on your K3. You will then be listening to your low-noise rx antenna on the main receiver, and that is what will be displayed on the P3. -- Then, use a BNC-to-BNC jumper cable to connect the K3 RX ANT 'OUT' to the K3 'AUX RF' input. That will let you listen to your noisy TX antenna on the 2nd receiver, the output of which will not be displayed on the P3. 73, Dale - WA8SRA On Sat, Dec 30, 2017 at 7:25 PM, Bill Conwell <b...@conwellpdx.com> wrote: > For 160, I've got a noisy TX antenna, and a quiet RX antenna. I sometimes > run them in diversity mode, with TX antenna connected to K3's ANT1 port, > and RX antenna connected to AUX port. > > Diversity works fine. > > But the P3 shows the IF from the noisy TX antenna - in which many weak > stations are obscured by noise. > > Is there any configuration by which I can get P3 to show, instead, the > signals from the quiet RX antenna (connected to AUX input)? > > Tnx, > > /Bill, K2PO > Portland OR > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to dmbor...@gmail.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com