Bill,
The only way I know of is to dig into the SubRX and connect its IF
output to the P3. The buffer circuit is there, but is not brought out
of the SubRX enclosure.
I don't know of an easy way to transfer the P3 input between the main
and the SubRX, but myself, I would simply use a relay external to the K3
and operate it manually when you want to make the switch.
73,
Don W3FPR
On 12/30/2017 7:25 PM, Bill Conwell wrote:
For 160, I've got a noisy TX antenna, and a quiet RX antenna. I sometimes
run them in diversity mode, with TX antenna connected to K3's ANT1 port,
and RX antenna connected to AUX port.
Diversity works fine.
But the P3 shows the IF from the noisy TX antenna - in which many weak
stations are obscured by noise.
Is there any configuration by which I can get P3 to show, instead, the
signals from the quiet RX antenna (connected to AUX input)?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
