Richard,
You will find some of your answers regarding audio levels and ALC levels
on my website www.w3fpr.com - scroll down to the bottom of the left
column and click on the link.
The K3S internal soundcard will be recognized by your computer as an
audio CODEC, it can be treated just like any other soundcard.
I cannot answer about the WSJT-X settings or the Mac because I use a
Windows computer. Others will likely give you those answers.
73,
Don W3FPR
On 1/14/2018 4:33 PM, Richard wrote:
After enjoying JT65 and FT8 with WSJT-X on my Mac connected to my Icom IC-7410
via a SignaLink USB box, my radio world is about to change quite a bit. I too
am buying a nice shiny new K3S. Hey, I deserve it. I should have it here and
out of the box in the next ten days or so.
I'll be using the USB connector on the back of the K3S and connecting the cable
directly to one of my Mac's USB ports, so what I need to know are these things:
1. How should WSJT-X's Preference Panels be set for this?
2. What settings must I have in the K3S menus?
3. How should the Mac's Sound Preferences be set? Any others to set?
4. How is ALC controlled? [This was done with the SignaLink's TX control]
5. How is the audio level for the waterfall controlled? [This was done with the
SignaLink's RX control]
Hope you can help.
Cheers!
Richard Kunc — W4KBX
Eustis, Florida 32726
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
