Somewhere in the deep dark memory I remember that com1 and com2 cant be used
My own setup uses com3 De vk2hhs Sent from my iPhone > On 17 Feb 2018, at 06:23, Greg Best <gbconsultin...@gmail.com> wrote: > > I am still trying to get a K3 talking. I have a connection through a > Microham USB III Interface box that connects the K3 RS232 port to my PC > running Win 7 64 Pro. The path is from the K3 to the Microham III USB > interface, then there is a straight USB connection from the Microham to the > PC. I have downloaded the K3 Utility and tried to see if it will establish > connection with the PC but it will not. COM port 1 is used. The K3 setting > is currently at 38400 baud but I also tried setting the K3 baud rate at > 4800 and doing a power on/off but with the same results. I see the K3 > utility screen on the PC step through the various baud rates but it will not > sync up to the K3. The PC recognizes the Microham USB interface when looking > at the Win 7 Device Manager but it indicates there is no device driver. I > don¹t always trust what the PC says though. Can someone point me to a > device driver I can download and install. My K3 FW is Rev 5.38. > > 73¹s > Greg > > > Greg Best P.E. > 16100 Outlook Avenue > Stilwell, KS 66085 > 816-792-2913 > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to vk2...@gmail.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
