Check your coax connection for the IF input. If you have another one, try another jumper.
Grant NQ5T K3 #2091, KX3 #8342 > On May 26, 2018, at 4:52 PM, Doug Eaton via Elecraft > <elecraft@mailman.qth.net> wrote: > > Hello Elecrafters. I recently moved my station to a different room. After > setting everything up in the new location, everything works normally except > for the P3.. The P3 turns on and boots-up normally, but there are no signals > on the display. The frequency of the K3 is displayed correctly on the top > center of the display, so it seems that the cable is hooked-up correctly, but > the only signals on the display are random noise on the bottom of the display > at a level below S1. It doesn't change even if I turn the antenna switch to > a dummy load, or even shut the K3 off. I live in town, and the local noise > level is normally S9 or so on the lower bands, but nothing shows on the > display on any band, even though the K3 is picking-up signals. Any ideas? > Thanks es 73 de Doug N7QS. > ______________________________________________________________ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
