Don, I confirmed the correct com port is com3.
Mark WU6R > On Jun 2, 2018, at 3:53 PM, Don Wilhelm <donw...@embarqmail.com> wrote: > > Mark, > > Are you using the USB interface on the K3S, or a USB to serial adapter to > connect to the K3? > > If that is the case, did the assigned COM port get changed with the Windows > 10 Update? Some have reported it has happened to them. > > To check the COM port that is assigned, open Device Manager and expand the > PORTS listing. Then unplug the USB connector and see which COM port goes > away - now plug it back in and observe which COM port is assigned. > > Plug that COM port into K3 Utility or any other application that you are > using to communicate with the K3. > > If you don't see a COM port assigned, then suspect the USB to serial adapter > - reload its drivers to see if that fixes it. > > 73, > Don W3FPR > >> On 6/2/2018 3:10 PM, Mark Wheeler wrote: >> Wayne, >> No I cannot. The command tester tab and terminal tab are grayed out. >> Mark >> WU6R >> Sent from my iPad >>> On May 30, 2018, at 11:40 PM, Wayne Burdick <n...@elecraft.com> wrote: >>> >>> Can you communicate with the K3 using a simple terminal server? E.g., send >>> “FA;” and see if you get the VFO A frequency in response. >>> >>> That would demonstrate that the port and driver are working. >>> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com