Linas and all,
I don't know if the policy is still in place, but several years ago,
Eric stated that defective knobs would be replaced at no cost. Contact
Elecraft support.
73,
Don W3FPR
On 6/8/2018 8:25 AM, Linas Balsys wrote:
The same is here. It is the crack in the knob, I can see it. You can try to
tighten up the screw a bit but not too much not to finaly break the knob.
If it is not completely loose you still can find the end stop while turning
very gently and slowly. The best way surely is to get the knob replaced :)
73 Linas LY2H
<<It's taken me 8 years to finally "break" something. Well it's not....>>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to donw...@embarqmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
