Thanks, Wayne.
73,
Scott K9MA
On 6/16/2018 16:35, Wayne Burdick wrote:
Scott,
Every ATU design has different stray amounts of L and C. But the differences
are small between the KPA1500 ATU and our other ATUs, especially the
battlefield-proven KAT500, which has a virtually identical circuit. We test the
ATUs into various loads to verify matching range.
That said, if you believe yours has a matching range problem, please contact
support. There’s even the possibility it’s a firmware issue.
73,
Wayne
N6KR
On Jun 16, 2018, at 1:26 PM, K9MA <k...@sdellington.us> wrote:
I've also noticed that the ATU often doesn't get a very good match, even if I
try twice as per the manual. The K3 ATU, by contrast, usually finds a much
better match for the same load. (Not talking high load SWR here, less than
2:1.) I haven't compared the component values in the two ATU's, but I expect
they're similar, so they should be able to achieve equally good matches.
Scott K9MA
--
Scott K9MA
k...@sdellington.us
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com