Mark,
The switch disconnects the K2 power input from the battery, so you must
have the switch in the ON position for the battery to be in circuit for
testing/operation (also for charging the battery). If you are using the
power supply for charging the internal battery, increase the power
supply to at least 14.1 volts (14.3 volts is better).
73,
Don W3FPR
On 8/1/2018 12:05 AM, Mark Petrovic wrote:
I'm installing the KBT2 internal battery option on my K2 s/n 7809.
In what position should the K2 rear panel "Int. Battery" switch be for the
Connecting and Testing of the KBT2, On or Off? I'm assuming, On, but
wanted to double check.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
