On 9/17/2018 9:20 AM, Drew AF2Z wrote:
Note that there is no electrical connection through the threads on the plug body and the threads on the shell; these threads are merely a stop to keep the shell from sliding down the cable when not connected to the SO-239 on the equipment.
This is simply not true. The entire PL259 body and shell and the entire mating body are part of the connection. What IS correct is that 1) the connectors must be properly installed both to the coax and the equipment, and 2) that the shell must be well tightened, often described as "wrench tight," with the pins on the PL259 firmly seated in the notches in the mating connector. I'm being generic about mating connectors because it's equally true of SO239 and other connectors like barrels, elbows, tees, and inter-series adapters.
73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
