A metal screwdriver might affect the inductance. There are several
inexpensive tuning tools made with a plastic handle and a small thin
metal blade, for example:
https://www.digikey.com/product-detail/en/bourns-inc/H-90/H90-ND/262571
I used a similar tool when I built my K2.
Bob, N7XY
On 9/21/18 7:41 AM, AE0MM via Elecraft wrote:
The green plastic tuning tool is too wide to fit in the slot of the narrow slot
slug-tuned inductors. Is it safe to use a screwdriver on the small slot 1µH
inductors?
Thanks,
--mark/ae0mm
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@n7xy.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com