Don...
Where did you find a ceramic screwdriver?
...robert
On 9/21/2018 21:52, Don Wilhelm wrote:
Chuck and all,
Those particular inductor cores with the narrow slot are difficult to
break, and they seldom stick.
Since I adjust them during repairs, I would wear out many tuning tools
in short time. I bought a ceramic screwdriver with a 1/8 inch wide
blade. I have another with a 5/32 inch wide blade that I use for
adjusting those new trimmer capacitors in plastic cases.
73,
Don W3FPR
On 9/21/2018 5:00 PM, hawley, charles j jr wrote:
I would get a new wand or file one down.
Some of those things get difficult to turn and the screwdriver breaks
the core. Is there anyway to loosen them up before they break?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rc...@verizon.net
--
Robert G Strickland, PhD ABPH - KE2WY
rc...@verizon.net.usa
Syracuse, New York, USA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
