I seem to have an issue with the K3 memory settings for the microphone. I changed the TX EQ to match settings and now when I check, the TX EQ is back to flat again. This has been happening since I set the values. I've had to restore the values I know them by heart and can do it quickly. Still, I don't know when they get lost so I always have to keep checking to be sure they are still active.
Just now, when I checked the different modes I find AM mic settings modified in the TX EQ but not with the same values as I used. I set the TX EQ for use with SSB and the MH4, I only found the AM settings were other than "0" when listening to some power line RFI on AM & that AM setting was still on when I happened to check the TX EQ settings. All the other mic settings for SSB were back to default 0. Having had to reset the mic settings frequently, last night I made the settings, turned off the K3, restarted & the settings were still intact. This next day, they are now lost again. To make the settings I enter the main config. Tap the needed # to get each individual audio band, I use VFO A to select the desired value, tap config when done to exit and that's all I do. What am I missing to save this to the K3's non-volatile memory? Thanks & 73, Gary KA1J ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com