Gary,
Email Tom (author of Win4K3) and see if he has some kind of workaround.
73,
Don W3FPR
On 11/2/2018 3:59 PM, Gary Smith wrote:
Don,
I'll give your suggestion a try & see how
that does.
I do use Win4K3, I need it to use WSJT as
WSJT doesn't like to share ports. I used
to use LP-Bridge which let me
simultaneously run all my software
flawlessly, till WSJT... and I fast
discovered it would not play nice unless
WSJT had sole communication with my
K3/K3s.
With Win4K3 I can use all the software
simultaneously including WSJT, logging
program, N1MM & MMTTY without having to
shut all the other software down every
time I want to change modes or software.
If it wasn't for WSJT making this issue,
it would be simple to just keep doing what
I was doing with LP-Bridge. As I do use
MSK144 & some FT8 and want to keep my
logging program running, I need to keep
using Win4K3.
Tom wrote a clever bit of software,
perhaps there is a way to tell it not to
change EQ settings, I'll have to check
that too.
Thanks & 73,
Gary
KA1J
Gary,
Are you using any software to control the K3?
I have just been informed that Win4K3 will often change the EQ
settings.
Remove the USB or RS-232 connection and try it with only the K3, then
set the SSB TX EQ. Check later to see if it has changed.
73,
Don W3FPR
On 11/2/2018 3:29 PM, Gary Smith wrote:
Hi Don,
No, I set them for SSB and at a later time
the TX EQ is flat and I have to change it
back to the settings to fit my mic. I
don't use AM except to listen to broadcast
stations & listen to the nature of RFI.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to donw...@embarqmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
