Isaac,
I did exactly that, using the HDSDR software. I used the RX ANT output
(must activate it from the front panel of the K3) to feed the antenna of
the RSP1. You use a BNC tee to feed the antenna back into the K3.
Purists use an RF splitter instead of a tee. I have a YouTube video that
shows the results: https://www.youtube.com/watch?v=KusmkeLdfwE
If you need further help, let me know.
73,
-John NI0K
TL_Netvision wrote on 11/8/2018 8:22 AM:
Hello all,
I am considering using an RSP1 SDR with my K3. I will probably use HDSDR
software to start with.
Can someone point me in the right direction for the whole procedure?
TIA
Isaac, 4Z1TL
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to jasimm...@pinewooddata.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
