On page 44, the manual suggests this for a 12V fault: Verify the DA-15 Control Cable is firmly installed on both Power Supply and RF Deck.
Tighten thumbscrews fully. wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) > On Nov 28, 2018, at 3:07 PM, Larry <wa9...@ameritech.net> wrote: > > My KPA1500 faults on all bands and goes offline. The reset button quickly > gets it back up only to fault again. The error message is: > > Fault: 12V supply > 10.8 volts > > The line voltage is stable with a pair of #10’s going to the breaker box. > > Anybody got any ideas before I call support? > > Larry, WA9MAG > > > Sent from Mail for Windows 10 > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to wun...@wunderwood.org ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com