Hi Larry,
Take a look at the control cable between the KPA1500 power supply and the RF
deck. A loose cable could cause this issue.
Make sure its plugged in firmly with the screws tightened on the connectors.
If there is still a fault, please contact supp...@elecraft.com (if you haven't
already) and we will help you get it resolved.
73,
Eric
/elecraft.com/
On 11/28/2018 3:07 PM, Larry wrote:
My KPA1500 faults on all bands and goes offline. The reset button quickly gets
it back up only to fault again. The error message is:
Fault: 12V supply
10.8 volts
The line voltage is stable with a pair of #10’s going to the breaker box.
Anybody got any ideas before I call support?
Larry, WA9MAG
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com