I have had the coax connector between the ladder line and the coax arc 
over with high power on 75.  Might check that.
George, W3HBM

On 1/27/2019 8:49 AM, Dave wrote:
> Also check the ladder line at the ends for possible breaks.
> 
> I had one of the “optimized” G5RV antennas sold by W8AMZ which used solid 
> wire in the ladder line. Due to flexing in the wind the wire broke where it 
> entered the epoxyed pvc end cap (SO-239 connector) the plastic jacketing was 
> still in place so the wire would be fine under 20 watts tune but would arc 
> under high power.
> 
> The fix was to rebuild the antenna using copper clad stranded ladder line.
> 
> Dave wo2x
> 
> Sent from my iPad
> 
>> On Jan 27, 2019, at 8:28 AM, Jack Satterfield <j...@satterfield.org> wrote:
>>
>> Michael..good suggestion, will do later when the rain stops.
>>
>> Thanks,
>>
>> Jack
>>
>> W4GRJ
>>
>>
>>
>> From: Michael Blake [mailto:k9...@mac.com]
>> Sent: Sunday, January 27, 2019 8:17 AM
>> To: Jack Satterfield
>> Cc: Elecraft Reflector
>> Subject: Re: [Elecraft] KAT500/KPA500 issue
>>
>>
>>
>> Jack, I had a similar thing happen and it turned out to be a tree branch had
>> grown into the antenna path and when on high power the antenna was arcing to
>> the tree branch.  Might not be a tree branch but look for any signs of
>> possible arching in the antenna, feed line or connectors.
>>
>>
>>
>> 73 - Mike - K9JRI
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> On Jan 27, 2019, at 8:10 AM, Jack Satterfield <j...@satterfield.org> wrote:
>>
>>
>>
>> After 5 years of perfect operation, now a very strange issue
>>
>> Bypass SWR 3 or 4:1
>>
>> KAT500 tunes to 1.3:1
>>
>> Switch amp to operate, operating SBB on first voice KAT500 goes full scale
>> swr and amp faults on high swr
>>
>> Never had a issue before, antenna is g5rv
>>
>> Any ideas appreciated.
>>
>> Jack
>>
>> W4GRJ
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to k9...@mac.com
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to rocke...@gmail.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to gkid...@ilstu.edu
> 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to