Dave,
Open the KAT500 manual to page 5 and see the cabling diagram depicted there.
There is no relationship between the K3 and P3 for considerations with
the amplifier and ATU.
If you have a K3S - the P3 connects to the P3 with the RS232 connector
and not the ACC connector, so there is no conflict.
If you have the K3S or a K3 upgraded with the KIO3B, then download the
latest P3 manual and look at the cabling on page 5. You will need the
CBLP3Y to connect it as shown there.
73,
Don W3FPR
On 2/16/2019 7:51 PM, Dave Cole (NK7Z) wrote:
Hello,
I have a K3, and a P3, connected to a computer. I now have a KAT500,
and a KPA500.
I do not see a full cabling diagram for the entire setup. Does one
exist? If so, where can I obtain it?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
