Thanks Don, that was what I needed to hear on your first post. After I
figured out that nothing goes through the P3 from the K3 to the KAT500,
things made a lot more sense...
What a nice setup I have now... I will be selling my ALS-1306, and
Palstar HF-AUTO as a result of getting this little amp... Three db
difference is nothing to worry about, so 500 watts is great... Got a
chance to use it today on the EU opening on 20... How nice it is in
CW... I have never run full break-in, over the past 50 years of being a
ham... Should have tried it long ago! :)
Thank you for the help!
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
Award Manager, 30MDG Grid Awards
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 2/17/19 6:29 AM, Don Wilhelm wrote:
Dave,
I see that you have it figured out.
As to your question - the K3 and P3 connect together using the IF out
coax and the RS-232 connection.
The KAT500/KPA500 connect using the AUX cable - that is no
interconnection between the P3 and the KAT500/KPA500, they are entirely
separate.
73,
Don W3FPR
On 2/16/2019 9:06 PM, Dave Cole (NK7Z) wrote:
Can you expand on:
"There is no relationship between the K3 and P3 for considerations
with the amplifier and ATU."
What does this mean exactly?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com