I have an additional problem, which is that sometimes this happens when
I use the band up and band down buttons on the rig. I have not been able
to understand why it only happens sometimes and not always.
I have a macro set up in the Commander module of the DXLabs program that
I use for logging, which checks what band I'm on and then resets the
limits and center as I want them, but it's still annoying.
Incidentally, for those who might be confused by the whole issue, it
applies to using the P3 in FIXED, not tracking, mode.
73,
Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
CWops no. 5
http://www.qsl.net/k2vco/
On 22/07/2019 3:04, Fred Jensen wrote:
Not sure who I'm talking to here, no signature, no call. It's a little
hard to explain but ...
Assume you set SPAN=100 KHz and put the left edge at the bottom of each
band. Changing bands back and forth using the BAND ^/v switch will
preserve these settings, and every time you come back to a previous
band, they will appear ... so long as you don't touch any of the P3
controls. However, using CAT commands [e.g. from a logger], you can
change to a new band and the settings will hold, however returning to
the previous band, the SPAN will still be 100 KHz but the center
frequency will have moved and the left edge will no longer be at the
bottom of the band. Admittedly, it's a bit hard to duplicate but the
circumstances that cause it are common in contesting and it has been
duplicated by several folk, including me.
The issue has been raised here on the list more than once. I think it
first came up several years ago, which could be 1 or 6, even Apollo 11
seems like yesterday to me these days. [:-) It has some of the earmarks
of an intentional attempt to "do something good" in the firmware which
turned out to be not so good, but I really don't know. For whatever the
reason, I expect it to come back to the settings it had when I left that
band.
As Randy said, it is really annoying. I, and I think most, use the P3
visually instead of looking at the K3. If I set the left edge at the
bottom of the band and the SPAN at 100 KHz, I automatically visualize
the 1st 100 KHz directly from the screen. If it's changed as a result of
band changes, my mental picture of that band segment is wrong.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 7/21/2019 4:20 PM, Tom wrote:
Hi,
What exactly do you mean?
It is always set to whatever you send. If you explain this a little
more perhaps I can help.
73
-----Original Message-----
From: elecraft-boun...@mailman.qth.net
<elecraft-boun...@mailman.qth.net> On Behalf Of Randy Farmer
Sent: July 21, 2019 2:44 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3 center frequency
It's been brought up several times in the last two or three years. No
response from the P3 software guys. It's EXTREMELY annoying that the
P3 won't respect the center frequency setting if the radio is tuned
via any CAT command. I've given up on hoping it will ever be fixed. My
guess is that it's all hands and the cooks working on K4 software
these days.
73...
Randy, W8FN
On 7/21/2019 12:45 PM, Fred Jensen wrote:
Jim: In general, yes, if you change bands with BAND ^/v. When you
change bands via the CAT, the P3 center freq won't always end up where
you last had it. I believe SPAN width is preserved but the span
limits show up strange. It's a known issue, has been discussed at
some length here a few months ago.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 7/21/2019 10:31 AM, Jim N7US wrote:
Should the P3 center frequency and span be remembered when changing
bands?
Rephrasing, can they be remembered when changing bands?
Jim N7US
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to elecraft.l...@videotron.ca
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k6...@foothill.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k2vco....@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com