Look at the MCnnn; command, p15 of the Programmer’s Reference. Sent from my iPhone
> On Aug 30, 2019, at 7:00 PM, Fred Jensen <k6...@foothill.net> wrote: > > I've gone through the K3 command list several times and I can't find a > command that allows me to select a specific frequency memory channel from a > macro. I've been making a few CW QSO's on 60 m, I have an empty slot on my > KPOD, and I'd like to: > > M>V > Select slot > M>V > > My 60 meter slots are set up for channel hopping thru the 5 "channels" with > VFO A set to center of channel [CW, PSK] and VFO B set to the suppressed > carrier frequency for USB. > > 73, > Fred ["Skip"] K6DGW > Sparks NV DM09dn > Washoe County > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to ghyoung...@gmail.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com