Their isolators built in the K3 on the LineIn/LineOut lines. And there is no “tx DATA” mode. The “tx” is indicates which VFO is used for transmit with an arrow above (A) or below (B).
Sent from my iPhone ...nr4c. bill > On Sep 27, 2019, at 8:25 PM, Jim Miller <jtmille...@gmail.com> wrote: > > Do you hear the human SSB also? > > >> On Sep 27, 2019, at 8:20 PM, Bill Johnson <k9...@live.com> wrote: >> > > You can buy an audio isolator cable on line to remove the ground loop > issues. Just search the topic for devices. I believe I used Amazon. > > Bill > 920-421-1172 > > ________________________________ > From: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> on > behalf of Conrad PA5Y <g0...@g0ruz.com> > Sent: Friday, September 27, 2019 4:26:55 PM > To: elecraft@mailman.qth.net <elecraft@mailman.qth.net> > Subject: [Elecraft] Audio Hum in TX Data Mode > > I put up a new 6m antenna mainly for EME and I was so looking forward to > using my K3S. The RX is great, I run it in parallel with 2 other receivers > and it works very well on EME. However try as I might I cannot get rid of > some quite bad hum on the TX Audio. I am using USB and before you ask yes I > have got a low impedance ground from the PC to the K3S although removing it > makes absolutely no difference. What did make a difference was moving the > radio away from sources of magnetic fields such as monitors. However I cannot > get rid of it completely. It also increases or at least changes when I put my > hands on the radio. > > I have a few other radios located nearby and close to a monitor, pc or PSU > and they do not suffer from this at all. Is this a common problem, is it a > bad ground in the audio path internally or magnetic coupling into an audio > transformer? > > It is completely impractical for me to move my radios 10 feet from any > magnetic fields. Short of wrapping the radio in mu metal I really do not seem > to be able to fix this. > > Any ideas? I have read and understood and followed Jim K9YC's advice and this > works perfectly for my other 3 radios. I am really at a loss. > > 73 > > Conrad PA5Y > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to k9...@live.com > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to j...@jtmiller.com > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
